30% Polyaluminium Chloride (pac)

30% Polyaluminium Chloride (pac)

30% polyaluminium chloride (pac) Property: The product called PAC for short. PAC is a kind of inorganic macromolecule flocculant. Solid appears as light yellow. Outstanding feature of PAC: It has strong capacity of purification of water, wide application, a wide application in PH range of...

Send InquiryChat Now
Product Details

        30% polyaluminium chloride (pac)

 

Property:

 

The product called PAC for short. PAC is a kind of inorganic macromolecule flocculant. Solid appears as light yellow.

 

Outstanding feature of PAC:

 

It has strong capacity of purification of water, wide application, a wide application in PH range of 5.0~9.0;

 

Remove the stimuli in water, such as SS,COD,BOD and remove heavy mental ion As,Pb,Hg,ect;

 

At the low temperatureof water ,it can still keep the stable sedimentation effects :

 

lower corrosiveness on piping equipment;

 

It is widely applied for treating the drinkingwater, industrial waste water and daily sewage etc.

 

Specifications

 

we are the produce of pac,and engage in the product for several years,without doubt we could offer the high quality PAC

 

ITEM

Standard

AL2O3  (m/m):%

≥30

Water- insoluble(m/m):%≤

0.3

Basicity%

40~90

Ammonium Nitrogen:% ≤

0.09

As(m/m):%≤

0.0005

Pb(m/m):%≤

0.003

Cd(m/m):%≤

0.0006

Hg(m/m):%≤

0.00002

Cr6+ (m/m):%≤

0.0015

Ph Value

3.5~5.0

Packing

25kg in net PP bag,22MT in the 20’FCL

Use

Watertreatment Industry such as drinking water,industrial Process water,Daily sewage,etc.

 

 

 

Application Methord:

 

  1. The solid drug should be on the basis of usage amount ,diluted 5-15times .

  2. Determine the best drug dosage as per the different turbidity degree of original water .

  3. The nomal cloudy water (turbidity100-500mg/L),use 20-30kg per 1000MTs;As to the undrinkable water, can be added rightly.

  4. As per the dosage of 5-10kg/m3.when used ,firstly mix and dissolve PAC and water in 1:3,then add some water to dilute to 2-3%,lastly spill the solution into swimming pools.

 

For example:

 

If you need to add 5kg PAC in a swimming pool of 1000 cubes, firstly you should put PAC in a drum which has 15kg water inside ,stir it. After the whole of PAC is added, then add 150kg water in the drum and stir them ,spill the solution into swimming pool ;After deposit it for about 8 hours ,you can use a suck sewage pump absorb the pollution .

 

 

 

 

 

Note:

 

  1. Before spill PAC,the PH should be adjust to between 6.8-8.2 so that we can get the best effect .

  2. In order to keep the water from being polluted again,When purify the water in the pool ,no body can stand there.

  3. Before add water to the swimming pool ,please disinfect the water for 1-2days in another little pool firstly.

 

Storage & transportation:

 

 Stored in dry, cool airiness place, far away from heat, avoid insolation, sign with no moisture and no insolation
Packing:

 

plastic woven bag with Pel  iner.N.W.25kg.

 

PAC 3 convenient resealable pack

20110115101700553

 


Hot Tags: 30% polyaluminium chloride (pac), China, suppliers, manufacturers, factory, customized
Inquiry